Induction-dynamics C1 Uživatelský manuál stáhnout pdf (Strana 3)

General Information

Please read these instructions thoroughly before attempting to install and operate the C1

center speaker.

Check Speaker and Parts

Unpack and carefully check each loudspeaker. If you suspect damage from transit, report

the problem immediately to your dealer and/or delivery service.

If possible, save the shipping cartons for future use.

General Care of Your Loudspeaker

Whenever changing speaker wires, interconnect wires, or power cords, always turn off all

equipment.Topreventreorshockhazard,donotexposetheampliertorainorexcessive

moisture.Toavoidelectricshock,donotopentheamplier.Therearenouserserviceable

parts inside.

Yourspeakersandampliercomeinahighqualitynishthatisbothattractiveanddurable.

To clean, use a soft, damp cloth. If your drivers become dusty, dust them with a paintbrush

or a brush vacuum attachment. Do not use a strong or abrasive cleaner.

The grille is covered in acoustic cloth. To keep your grille clear of debris, we recommend

you use a lint roller (like you would use on clothes).

Bass and Loudness Contour Controls

Do not use bass or loudness contour controls. Induction Dynamics’ subwoofers produce

very low frequencies without these controls. Use of these controls will make the bass sound

“boomy”, obscure higher frequencies, and possibly cause damage due to excessive cone

excursion.

C1 Location

Ideally, the C1 should be placed behind a perforated video projection screen. For use

withaat-screenorothervideomonitor,thebestplacementisusuallybelowthescreen.

If it is not possible to place the speaker below the screen, placement above the screen is

acceptable.

In any case, the center channel should be centered between the left and right front

channels, as close to listening height as possible.

1 2 3 4 5 6 7 8 ... 11 12

Žádné komentáře

Induction-dynamics C1 Uživatelský manuál Strana 3